No. 5 x 40 BAER HSSG Hand Tap Set (3pcs.) UNC baercoil baer coil drill bit m15.50 without tip)

without tip)

The spiral point (spiral entry) ensures easy cutting and also good chip removal

5415 15Mo3 1

709 Nominal diameter in mm 18 Pitch 2

5 x B7358-15: BaerCoil thread inserts M 33 x 2

No. 5 x 40 BAER HSSG Hand Tap Set (3pcs.) UNC baercoil baer coil drill bit m15.50 without tip)BAER HSSG Hand Tap Set (3pcs.) UNC No. 5 x 40 The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre cutting and