6 x Plank Grabber™ Suction Pads What's in the kit:

What's in the kit:

Injectafix requires a tiny 2mm hole to allow our powerful self levelling adhesive to be injected between the floor surface and the subfloor

apply pressure

simply heat up the existing pad with a hairdryer or by placing it in boiling water for two to three minutes

Groove Gasket is almost certainly what you need

6 x Plank Grabber™ Suction Pads What's in the kit:This kit contains 6 suction pads designed to service your Plank Grabber. To remove the old suction pad, simply heat up the existing pad with a hairdryer or by placing it in boiling water for two to three minutes, then peel away the old pad. There will be a sticky fuzz left over on the Plank Grabber, dont worry about removing this, just add the new pad directly on top and away you go!